2-22 Chapter 2: BIOS setup
2.4.4 Onboard device configuration
The items in this menu show the onboard device configuration settings.
Select an item then press <Enter> to display a pop-up menu with the
configuration options.
Onboard Device Configuration
IDE Function Setup
NVRAID Configuration
USB Configuration
Onboard LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
AC97 Audio [Enabled]
PCI IEEE 1394a [Enabled]
Serial Port 1 Address [3F8/IRQ4]
Parallel Port Address [378/IRQ7]
Parallel Port Mode [ECP+EPP]
ECP Mode Use DMA 3
Select Menu
Item Specific Help
To Next Page
Loading...
