ASUS A8N-SLI 2-29
2.5.1 APM configuration
This menu shows the Advanced Power Management (APM) configuration
settings. Select an item then press <Enter> to display a pop-up menu with
the configuration options.
APM Configuration
Restore on AC Power Loss [Enabled]
PWR Button < 4 secs [Instant-Off]
WOL (PME#) From Soft-Off [Enabled]
WOR (RI#) From Soft-Off [Enabled]
Power-On by Alarm [Disabled]
x Date (of Month) 0
x Time (hh:mm:ss) Alarm 0 : 0 : 0
Power Up By PS2 Keyboard [Disabled]
Power Up By PS2 Mouse [Disabled]
Restore on AC Power Loss [Enabled]
Allows you to set whether or not to reboot the system after power
interruptions. [Disabled] leaves your system off while [Enabled] reboots
the system. Configuration options: [Disabled] [Enabled]
PWR Button < 4 secs [Instant-Off]
Allows you to set the event after the power button is pressed for more
than 4 seconds. Configuration options: [Suspend] [Instant-Off]
WOL (PME#) From Soft-Off [Enabled]
Allows you to enable or disable the Wake-On-LAN feature. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
WOR (RI#) From Soft-Off [Enabled]
Allows you to enable or disable the Wake-On-Ring feature. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Select Menu
Item Specific Help
Press [Enter] to select
whether or not to
restart the system after
AC power loss.
To Next Page
Loading...
