2-18 Chapter 2: BIOS setup
DRAM Configuration
The items in this sub-menu show the DRAM-related information that the
BIOS auto-detects.
DRAM Configuration
Timing Mode
[Auto]
x Memclock index value (Mhz) 200Mhz
x CAS# Latency (Tcl)
2.5
x Min RAS# active time (Tras) 8T
x RAS# to CAS# delay (Trcd) 4T
x Row precharge time (Trp)
2T
x 1/T/2T Memory Timing
2T
Bottom of 32-bit [31:24] IO [E0]
DRAM Over 4G Remapping
[Disabled]
MTRR mapping mode
[Continuous]
Select Menu
Item Specific Help
<Enter> to select DRAM
configuration. [Auto] is
recommended. [Manual]
allows you to set each
configuration on your
own.
2.4.2 Chipset configuration
The items in this menu show the chipset configuration settings. Select an
item then press <Enter> to display a pop-up menu with the configuration
options.
Chipset
DRAM Configuration [Press Enter]
Errata 94 Enhanced [Enabled]
Select Menu
Item Specific Help
DRAM timing and
control.
To Next Page
Loading...
