Asus A8N32-SLI - Socket 939 NVIDIA nForce SPP 100 ATX AMD Motherboard Deluxe - Dual Graphics Card Setup; Setting the ASUS EZ Selector Card

3-4 Chapter 3: NVIDIA
®
SLI™ technology support
2. Simultaneously push the retention clips outward to release the card.
Retention clip
Pre-installed
ASUS EZ
selector card
ASUS EZ
selector
3.2 Dual graphics card setup
3.2.1 Setting the ASUS EZ selector card
Your motherboard package comes with
a pre-installed ASUS EZ selector
card. By default, the card is set
for a single graphics card. To use
two graphics cards on this
motherboard, you must first set the
selector card to Dual Video Cards.
To set the selector card:
1 . Locate the selector
card on the
motherboard.