Asus A8N32-SLI - Socket 939 NVIDIA nForce SPP 100 ATX AMD Motherboard Deluxe - Page 37

ASUS A8N-SLI 1-27
1 1 . Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or
switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends a
high-level signal to this connector when a chassis component is
removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.
A8N-SLI
®
A8N-SLI Chassis alarm lead
CHASSIS
+5VSB_MB Chassis Signal GND
(Default
)