2-82-8
2-82-8
2-8
Chapter 2: InstallationChapter 2: Installation
Chapter 2: InstallationChapter 2: Installation
Chapter 2: Installation
Boot Option Uses [System]
Set this item to [System] if you want the BIOS to control the boot
option. Set to [BMC] if you want the BMC to control the boot option
OS Boot Timeout [Disabled]
A systen reset occurs after the specified timeout if the operating
system boot fails (does not connect to the Server Manager).
Configuration options: [Disabled] [Enabled]
Timeout Value [ 0]
Allows you to set the operating system boot timeout in minutes. Valid
input ranges from 1 to 100 minutes, with 0 signifying that the boot
timeout is inactive.
Clear System Even Log [Disabled]
Allows you to clear the system event log.
Configuration options: [Disabled] [Enabled]
BMC Time Sync. [Enabled]
Allows you to synchronize the BIOS time with the BMC time.
Configuration options: [Disabled] [Enabled]
System Event Log
Allows you to view all the events in the BMC event log. It will take a
maximum of 15 seconds to read all the BMC SEL records.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Server
Total number of entries: 0
SEL Entry Number: [N/A]
Use +/- to traverse
the event log.
To Next Page
Loading...
