48
LED projector E-Manual
Using 3D glasses
Your LED projector supports 3D technology for an enhanced
viewing experience. Refer to the following details when using your
purchased 3D glasses with this LED projector.
IMPORTANT: Purchase TI 3D-ready glasses. Your 3D les must be
compatible with the TI 3D format.
NOTE: For more details on viewing 3D les, refer to the user guide
that comes with your 3D glasses.
To view 3D les:
1. Download a compatible 3D player software on your computer.
IMPORTANT! Ensure that the software version supports 3D format
conversion to frame sequential output via an HDMI/VGA port.
2. Turn on your 3D glasses.
3. Ensure your PC monitor is set to 1024 x 768 display resolution
settings.
4. Connect your PC to the LED projector using the HDMI or VGA
port, then enable 3D mode on your LED projector.
5. Play the 3D le from your PC.
To Next Page
Loading...
