Asus ESC4000 G4S User Manual

5-42
Chapter 5: BIOS Setup
5.12 Tool menu
TheToolmenuitemsallowyoutocongureoptionsforspecialfunctions.Selectanitemthen
press <Enter> to display the submenu.
IPMI Hardware Monitor
Allows you to run the IPMI hardware monitor.
Start EZ Flash
Allows you to run ASUS EZ Flash BIOS ROM Utility when you press <Enter>. Refer to the
ASUS EZ Flash Utility section for details.
Pressing <Esc> does not immediately exit this menu. Select one of the options from this
menu or <F10> from the legend bar to exit.
Discard Changes & Exit
Exit System setup without saving any changes.
Save Changes & Reset
Exit System setup after saving the changes.
Restore Defaults
Restore/load default values for all the setup options.
Boot Override
These items displays the available devices. The device items that appears on the screen
dependsonthenumberofdevicesinstalledinthesystem.Clickanitemtostartbootingfrom
the selected device.
5.13 Save & Exit menu
The Save & Exit menu items allow you to save or discard your changes to the BIOS items.

Asus ESC4000 G4S Specifications

General

Chipset	Intel C621
Form Factor	4U Rackmount
GPU Support	Supports up to 4 double-width GPUs
Processor	Intel Xeon Scalable processors
Memory	Up to 3TB DDR4 ECC RDIMM/LRDIMM
Memory Slots	16 x DIMM slots
Storage	8 x 3.5" hot-swap storage bays
Networking	2 x 10GBase-T LAN ports
Power Supply	1+1 Redundant 1600W 80 PLUS Platinum Power Supply
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi