4-6
Chapter 4: Software support
Chapter 4
APU Multiplier
Allows you to manually adjust the APU Multiplier.
1. Click on the APU Multiplier tab.
2. Drag the adjustment bar leftwards or rightwards to the desired value.
3. Click
Apply for the changes to take effect.
• Set the APU Multiplier item in BIOS to [Auto] before using the APU Multiplier function
in TurboV. Refer to the BIOS section of your motherboard user manual for details.
• The APU Multiplier bars show the status of the APU cores, which vary with your APU
model.
APU Multiplier
Click to restore all
start-up settings
Adjustment bar
Applies all changes
immediately
Undoes all changes
without applying
To Next Page
Loading...
