ASUS F2A85-M PRO
3-21
Chapter 3
3.6.4 CPU_FAN Q-Fan Control [Disabled]
[Disabled] Disables the CPU Q-Fan control feature.
[Enabled] Enables the CPU Q-Fan control feature.
CPU_FAN Speed Low Limit [200 RPM]
This item appears only when you enable the CPU_FAN Q-Fan Control feature and allows
[300 RPM] [400 RPM] [500 RPM] [600 RPM]
CPU_FAN Fan Profile [Standard]
This item appears only when you enable the CPU_FAN Q-Fan Control feature and
allows you to set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust
depending on the CPU temperature.
[Turbo] Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
CPU_FAN Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature.
The values range from 20ºC to 75ºC.
Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The
values range from 20% to 100%. When the CPU temperature reaches the
upper limit, the CPU fan will operate at the maximum duty cycle.
CPU_FAN Lower Temperature [20]
Displays the lower limit of the CPU temperature.
Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The
values range from 0% to 100%. When the CPU temperature is under 40ºC,
the CPU fan will operate at the minimum duty cycle.
To Next Page
Loading...
