Asus F2A85-M PRO - Probe II

ASUS F2A85-M PRO
4-23
Chapter 4
4.3.10 Probe II

of any problem with these components. Probe II senses fan rotations, CPU temperature,
and system voltages, among others. With this utility, you are assured that your computer is
always at a healthy operating condition.
Launching Probe II
To launch Probe II, click Tool > Probe II on the AI Suite II main menu bar.

Click the Voltage/Temperature/Fan Speed tabs to activate the sensors or to adjust the sensor

alerts, or change the temperature unit.
Loads the default
threshold values
for each sensor
Applies your
changes
Loads your saved

Saves your

• Click Monitor > Sensor on the AI Suite II main menu bar and the system status will
appear on the right panel.
• Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com
www.devicemanuals.eu