F2A85-M PRO
1-29
Chapter 1
the Front Panel Type item in the BIOS to [HD]. See section 3.5.5 Onboard Devices
for details.
• The front panel audio I/O module is purchased separately.
This connector is for the additional USB 3.0 ports. Connect the USB 3.0 bracket cable
to this connector, then install the USB 3.0 bracket to the rear side of the chassis. If your
can have a front panel USB 3.0 solution.
This connector is for a chassis-mounted front panel audio I/O module that supports
panel audio I/O module cable to this connector.
The USB 3.0 module is purchased separately.