Asus H87I-PLUS - Ai Overclock Tuner Options; MultiCore and CPU Ratio Settings; ASUS MultiCore Enhancement; CPU Core Ratio Configuration

ASUS H87I-PLUS
2-15
Target CPU Graphics Speed : xxxxMHz
Displays the target CPU Graphics speed.
2.5.1 Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking conguration options:
[Auto] Loads the optimal settings for the system.
[Manual] Allows you to automatically optimize the CPU ratio and BCLK frequency.
[X.M.P.] Allows your system to automatically optimize the CPU ratio, BCLK
frequency, and memory parameters. If you install memory modules
supporting the eXtreme Memory Prole (X.M.P.) Technology, select this
item to set the proles supported by your memory modules for optimizing
the system performance.
2.5.2 ASUS MultiCore Enhancement [Enabled]
[Enabled] Default set to [Enabled] for maximum performance under XMP/Manual/
User-dened memory frequency mode.
[Disabled] Allows you to set to default core ratio settings.
2.5.3 CPU Core Ratio [Auto]
Allows you to set the CPU ratio and sync automatically, per core or all cores. Conguration
options: [Auto] [Sync All Cores] [Per Core]
When the CPU Core Ratio is set to [Per Core] or [Sync All Cores], the following items
appear:
1-Core Ratio Limit [Auto]
Allows you to set the 1-Core Ratio Limit. Select [Auto] to apply the CPU default Turbo Ratio
setting or manually assign a 1-Core Ratio Limit value that is higher than or equal to the 2-
Core Ratio Limit.
2-Core Ratio Limit [Auto]
This item becomes congurable only when the CPU Core Ratio is set to [Per Core] and
allows you to set the 2-Core Ratio Limit. Select [Auto] to apply the CPU default Turbo Ratio
setting or manually assign a 2-Core Ratio Limit value that is higher than or equal to the 3-
Core Ratio Limit. 1-Core Limit must not be set to [Auto].
3-Core Ratio Limit [Auto]
This item becomes congurable only when the CPU Core Ratio is set to [Per Core] and
allows you to set the 3-Core Ratio Limit. Select [Auto] to apply the CPU default Turbo Ratio
setting or manually assign a 3-Core Ratio Limit value that is higher than or equal to the 4-
Core Ratio Limit. 1-Core/2-Core Ratio Limit must not be set to [Auto].