Asus H87M-PLUS - Dram Timing Control

ASUS H87M-PLUS
3-11
Chapter 3
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The conguration options vary with the
BCLK Frequency: DRAM Frequency Ratio item settings.
CPU Graphics Max. Ratio [Auto]
[Auto] The CPU Graphics Max. Ratio is set to its optimized setting depending on
the system loading.
[Manual] Use the <+> or <-> keys to adjust the optimal CPU Graphics Max. Ratio.
The frequency may vary depending on the system load.
GPU Boost [As is]
GPU Boost accelerates the integrated GPU for extreme graphics performance. Conguration
options: [As is] [Enabled]
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function. Conguration options:
[Disabled] [Enabled]
DRAM Timing Control
The subitems in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency [Auto]
Conguration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Conguration options: [Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
Conguration options: [Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
Conguration options: [Auto] [1] – [63]
DRAM COMMAND Rate [Auto]
Conguration options: [Auto] [1] – [3]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Conguration options: [Auto] [1] – [15]