Asus M4A88TD-M - Onboard Devices Configuration

ASUS M4A88TD-M 2-21
UMA Frame Buffer Size [Auto]
This item appears only when you set the Internal Graphics Mode item to [UMA].
Conguration options: [Auto] [32MB] [64MB] [128MB] [256MB] [512MB] [1024MB]
• The [512MB] option only appears when you install 1GB or higher capacity DIMMs.
• The [1024MB] option only appears when you install 2GB or higher capacity DIMMs.
Surround View [Auto]
If you set the PCI Express device as the primary display and enable this item, you may use
the internal graphics as the secondary display. This item appears only when you set the
Internal Graphics Mode item to [UMA]. Conguration options: [Auto] [Enabled] [Disabled]
When set to [Auto], only the primary display could be activated.
Frame Buffer Location [Above 4G]
Allows you to select the FB Location. Conguration options: [Below 4G] [Above 4G]
AMD HDMI Audio [Enabled]
Allows you to disable or enable the AMD 880 HD Audio.
Conguration options: [Disabled] [Enabled]
2.5.3 Onboard Devices Conguration
Serial Port1 Address [3F8/IRQ4]
Selects the Serial Port1 base address. Conguration options: [Disabled] [3F8/IRQ4]
[2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Selects the Parallel Port base addresses. Conguration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Selects the Parallel Port mode. Conguration options: [Normal] [EPP] [ECP] [EPP + ECP]
ECC Conguration
ECC Mode [Disabled]
Enables or disables the DRAM ECC that allows the hardware to report and correct
memory errors automatically. Conguration options: [Disabled] [Basic] [Good] [Super]
[Max] [User]
Internal Graphics
Primary Video Controller [GFX0-GPP-IGFX-PCI]
Allows you to set the primary display adapter. Conguration options: [GFX0-GPP-IGFX-PCI]
[GPP-GFX0-IGFX-PCI] [PCI-GFX0-GPP-IGFX] [IGFX-GFX0-GPP-PCI]
Internal Graphics Mode [UMA]
Selects the internal graphics mode. Conguration options: [Disabled] [UMA]