Asus MZ27AQL - Image Quality Settings; Sharpness and Response Time; Aspect Ratio and OverScan; VividPixel and Dynamic Contrast

3-5
ASUS LCD Monitor MZ27A Series
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel, ASCR, and Adaptive-Sync from this main function.
Standard Mode
MOVE/ENTER
Image
Sharpness
VividPixel
ASCR
Trace Free
Aspect Control
Adaptive-Sync
HDMI-1 2560 x 1440 @ 60Hz
ASUS MZ27A
BACK/EXIT
• Sharpness: Adjust the picture sharpness. The adjusting range
is from 0 to 100.
• Trace Free: Speeds up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjust the aspect ratio to Full, 4:3, or
OverScan.
• 4:3 is only available when input source is in 4:3 format.
• OverScan is only available for HDMI input.
• VividPixel: ASUS Exclusive Technol ogy that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0~100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Adaptive-Sync: Allows an Adaptive-Sync supported graphics
source (HDMI and DisplayPort) to dynamically adjust display
refresh rate based on typical content frame rates for power
efficient, virtually stutter free and low-latency display update.