Asus P11C-M/10G-2T - Connectors; Port for Ikvm; Ports for 10 G LAN; Power-On Button

ASUS P11C-M/10G-2T
2-27
2.8 Connectors
2.8.1 Rear panel connectors
1. RJ-45 port for iKVM.ThisRJ-45portfunctionsonlywhenyouenableASMB9
Management card.
2. Q-Code LED:TheQ-CodeLEDprovidesa2-digitdisplaythatshowsthestatusofyour
system. Refer to the Q-Code table of this user guide for more information about the
2-digit codes.
3. Power-on Button: Press this button to turn on the system.
4. Video Graphics Adapter port.ThisportisforaVGAmonitororotherVGA-compatible
devices.
5. RJ-45 ports for 10G LAN 1-2.Theseportsallows10GigabitconnectiontoaLocal
AreaNetwork(LAN)throughanetworkhub.RefertothetablebelowfortheLANport
LED indications.
6. USB 3.1 Gen 1 ports 5 and 6.Thesetwo4-pinUSBportsareavailableforconnecting
USB3.1Gen1devices.
7. USB 3.1 Gen 2 ports 1 and 2.Thesetwo4-pinUSBportsareavailableforconnecting
USB3.1Gen2devices.