129
External GPS
Your device allows you to use an external GPS device to receive GPS data.
NOTES:
• Your Pocket PC support only Bluetooth-enabled external GPS devices.
• Before using an external device, connect your external GPS device to your Pocket PC via Bluetooth. Refer
to Using Bluetooth
®
section for details.
To set an external GPS device:
1. Tap > Settings > System tab > External GPS.
2. From the Programs tab, select a program port.
NOTE: By default, the port is set to GPD1. We recommend that you DO NOT change the default setting.
3. From the Hardware tab, specify a hardware port and baud rate for your external GPS device to use.
NOTE: By default, the hardware port is set to COM2, and the baud rate is set to 57600. Refer to the user guide of
your external GPS device for details.
4. From the Access tab, select the Manage GPS automatically (recommended) box.
IMPORTANT: If you clear this check box, some GPS related application in your device may not be able to obtain
GPS data.
To Next Page
Loading...
