Asus P5GC - Page 82

4-24 Chapter 4: BIOS setup
Hyper Path 3 [Auto]
Allows you to enable or disable the ASUS Hyper Path 3 feature. Conguration
options: [Disabled] [Enabled] [Auto].
DRAM Throttling Threshold [Auto]
Enable DRAM Throttling Thermal Throttling will make your system more stable.
Conguration options: [Disabled] [Auto].
Booting Graphic Adapter Priority [PCI Express/PCI]
Allows selection of the graphics controller to use as primary boot device.
Conguration options: [PCI Express/PCI] [PCI/PCI Express].
PEG Buffer Length [Auto]
Sets the length of the PCI Express graphics card buffer.
Conguration options: [Auto] [Long] [Short].
Link Latency [Auto]
Sets the PCI Express graphics card link latency.
Conguration options: [Auto] [Slow] [Normal].
PEG Root Control [Auto]
Allows you to enable, disable, or set to automatic the PCI Express graphics card
root control. Conguration options: [Auto] [Disabled] [Enabled].
Slot Power [Auto]
Sets the PCI Express graphics card slot power.
Conguration options: [Auto] [Light] [Normal] [Heavy] [Heavier].
High Priority Port Select [Disabled]
Allows you to disable or select the high priority port. The specied high priority port
will be given arbitration above but below.
Conguration options: [Disabled] [PCI Express Port 1].