Asus P5KPL - Chipset

ASUS P5KPL 2-23
2.4.4 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Conguration
South Bridge Conguration
Max CPUID Value Limit [Disabled]
Enable this item to boot legacy operating systems that cannot support CPUs with
extended CPUID functions. Conguration options: [Disabled] [Enabled]
CPU TM function [Enabled]
Allows you to enable or disable the CPU internal thermal control function. In TM
mode, the CPU power consumption is reduced. Conguration options: [Disabled]
[Enabled]
Execute Disable Bit [Enabled]
Allows you to Enable/disable Execute Disable Function.
Conguration options: [Disabled] [Enabled]
Single Logical Processor Mode [Disabled]
Allows you to enable or disable the Single Logical Processor Mode. When
enabled, only COREO, logical processor 0 remains active.
Conguration options: [Disabled] [Enabled]
Hyper Threading Technology [Enabled]
Allows you to enable or disable the processor Hyper-Threading Technology.
Conguration options: [Disabled] [Enabled]
Intel
®
SpeedStep Technology [Enabled]
Allows you to use the Enhanced Intel
®
SpeedStep
®
Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.
Conguration options: [Enabled] [Disabled]
Congure North Bridge
features.
The following item appears only when you installed an Intel
®
Pentium
®
4 or
later CPU that supports the Enhanced Intel SpeedStep
®
Technology (EIST).