Asus P5L-MX IPAT - IDE Configuration

ASUS P5L-MX/IPAT 2-13
IDE Conguration
PATA Master Not Present
PATA Slave Not Present
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
SATA Port4 Not Present
IDE Controller [Enabled]
IDE mode [PATA-Primary,SATA-...]
Serial-ATA Port1 [Enabled]
Serial-ATA Port2 [Enabled]
Serial-ATA Port3 [Enabled]
Serial-ATA Port4 [Enabled]
Enable/Disable IDE
Controller
2.4.9 IDE Configuration
The items in this menu allow you to set or change the congurations for
the IDE devices installed in the system. Select an item then press <Enter>
if you wish to congure the item.
IDE Controller [Enabled]
Allows you to enable or disable the onboard IDE controller.
Conguration options: [Enabled] [Disabled]
IDE Mode [PATA-Primary, SATA-...]
Allows you to select the IDE mode.Conguration options: [SATA only-
Primary/Secondary (Non-combined, Legacy)] [SATA-Primary, PATA-
Secondary (combined, Legacy)] [PATA-Primary, SATA-Secondary
(Combined, Legacy)] [PATA only-Primary (Non-combined, Legacy)] [PATA-
Primary, SATA-Ports 1,2,3,4 (Non-combined, PATA-Legacy)]
Serial-ATA Port1/2/3/4 [Enabled]
Allows you to disable or enable the Serial-ATA devices.
Conguration options: [Disabled] [Enabled]