Asus P5Q3 Deluxe WiFi-AP n - Setting up the Client Mode

3-6 Chapter 3: Setting up
3.2.2 Setting up the Client Mode
In the client mode, you can connect to the LAN or Internet, or both, through a
wireless AP.
1. To launch the WiFi-AP @n setup
wizard, right-click the system tray icon
and select Wizard.
2. Select Join an existing wireless
network and click Next.
3. The wizard indicates you to use
windows automatic wireless
network conguration to connect
an existing wireless network or
change the wireless network
connection settings. Click Finish
to exit the wizard.
The ASUS Wi-Fi AP @n utility doesnt’ provide infrastructure mode and ad-hoc
mode conguration under Client Mode. To set up an infrastructure or ad-hoc
network, use Windows Zero Conguration under Windows
®
XP or WLAN
AutoCong under Windows
®
Vista. Refer to 3.4 Setting up Ad-hoc mode or
Infrastructure Mode under Windows
®
on page 3-11 for more details.