A-2 Appendix: CPU features
A.2.2 Using the EIST
To use the EIST feature:
1. Turn on the computer, then enter the BIOS Setup.
2. Go to the Advanced Menu, highlight CPU Conguration,
then press <Enter>.
3. Set the
Intel(R) SpeedStep Technology item to [Automatic],
then press <Enter>. See page 4-25 for details.
4. Press <F10> to save your changes and exit the BIOS setup.
5. After the computer restarts, right click on a blank space on the desktop, then
select Properties from the pop-up menu.
6. When the
Display Properties
window appears, click the Screen
Saver tab.
7. Click the
Power button on the
Monitor power section to open the
Power Options Properties window.
8. On the Power schemes section, click
, then select any option except
Home/Ofce Desktop or Always
On.
9. Click
Apply, then click OK.
10. Close the Display Properties window.
After you adjust the power scheme,
the CPU internal frequency slightly
decreases when the CPU loading is
low.
The screen displays and procedures may vary depending on the operating
system.
To Next Page
Loading...
Need help?
General
