2-14 ASUS P8H61-M2 USB3
2.4.3 GPU Boost
GPU Boost accelerates the integrated GPU for extreme graphics performance.
Conguration options: [OK] [Cancel]
2.4.4 DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press <Enter>.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2.4.5 CPU Power Management
The sub-items in this menu allow you to set the CPU ratio and features.
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and <->
keys or the numeric keypad to adjust the ratio. The valid value ranges vary according
to your CPU model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel
®
SpeedStep Technology (EIST).
[Disabled] Disables this function.
[Enabled] The operating system dynamically adjusts the processor voltage and
core frequency which may result in increased average consumption
and decrease average heat production.
Turbo Mode [Enabled]
This item appears only when you set the Enhanced Intel
®
SpeedStep Technology item
to [Enabled].
[Enabled] Allows processor cores to run faster than marked frequency in specic
conditions.
[Disabled] Disables this function.
The following three items appear only when you set both the Enhanced Intel
®
SpeedStep
Technology and Turbo Mode items to [Enabled].
Long duration power limit [Auto]
The default setting of this item will be TDP (65W or 95W for different CPUs). For Sandy
Bridge, Turbo Ratio can be kept a time duration exceed TDP for maximum performance. Any
under 255 can be programmed. Use the <+> and <-> keys to adjust the value.
Long duration maintained [Auto]
This value can vary from 1 to 32, which indicates the time window for Turbo Ratio over TDP
should be maintained. Use the <+> and <-> keys to adjust the value.
To Next Page
Loading...
