Asus PA238Q - Detaching the arm;stand (for VESA wall mount)

2-1
ASUSPA238QSeriesLEDMonitor
2.1 Detaching the arm/stand (for VESA
wall mount)
ThedetachablestandofthismonitorisspeciallydesignedforVESAwall
mount.

1. Disconnectpowerandsignalcables.Carefullyputthefrontofthe
monitorfacedownonacleantable.
2. Useascrewdrivertoremovethefourscrewsonthearm(Figure1),
andthendetachthearm/standfromthemonitor(Figure2).
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damagetothemonitor.
• Holdthestandofthemonitorwhileremovingthescrews.
Figure1 Figure2
• TheVESAwallmountkit(100x100mm)ispurchasedseparately.
• UseonlytheULListedWallMountBracketwithminimumweight/load
12.8kg(Screwsize:M4x12mm).