Asus PA279Q - PIP;PBP Settings

3-5ASUS PA279 Series LCD Monitor
• UniformityCompensation: adjusts different areas of the screen to
reduce any screen uniformy errors, providing consistent brightness and
color across the entire screen.
• ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
4. PIP/PBPSetting
The PIP/PBP Setting allows you to open up another sub-window connected
from another video source besides the main-window from your original video
source. By activating this function, you can have two pictures from two
different video sources displayed by the monitor.
• PIP/PBPMode: turns the PIP or PBP function on or off.
• PIP/PBPSource: Selects the video input source from among DVI, HDMI,
and DisplayPort.
• Size: Adjusts the PIP size to Small, Middle, or Large. (Only available for
the PIP mode)
• Position: Adjusts the position of the sub-window to Right-Top, Left-Top,
Right-Bottom, or Left-Bottom. (Only available for the PIP mode)
• Swap: Switches the sources of the main and sub-windows.
The DVI and HDMI input sources should not be selected as the main-
window or sub-window at the same time. See the table below for details.
Main-window
Sub-window
DVI HDMI DisplayPort
DVI No Yes
HDMI No Yes
DisplayPort Yes Yes
5. InputSelect
In this function, you can select your desired input source.