Asus PA279Q - Input Source Selection; System Setup Menu

3-6 Chapter 3: OSD (On-Screen Display) menu
6. SystemSetup
Allows you to adjust the system.
• SplendidDemoMode: splits the screen into two for Splendid modes
comparison. (Scenery mode/theater mode only)
• Volume: the adjusting range is from 0 to 100.
• OSDSetup:
* Adjusts the horizontal position (H-Position)/the vertical position
(V-Position) of the OSD from 0 to 100.
* Adjusts the OSD timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from opaque to transparent.
* Adjusts the OSD rotation.
• DisplayPortStream: supports SST (single-stream transport) and MST
(multi-stream transport) . When using the multi-stream transport, images
may not be displayed properly with some video card combinations.
The default setting is SST. When using the daisy chain function, be sure to
select MST first.
• Keylock: To disable all function keys. Press the NEMU button over five
seconds to cancel the key lock function.
• Information: shows the monitor information.