3-3ASUS PA329C Series LCD Monitor
Function
Standard
Mode
sRGB
Mode
Rec.709
Mode
Adobe
sRGB
Mode
DCI-P3
Mode
DICOM
Mode
User Mode 1/
User Mode 2
Color Temp.
6500K
Fixed
6500K
6500K
Fixed
6500K
6500K Disable
Fixed
6500K
Brightness
50
Fixed
50
50 50
50
50 50
Contrast
80
Fixed
80
80 80 80 80 80
Sharpness
Enable (0) Enable (0) Enable (0) Enable (0) Enable (0) Enable (0) Enable (0)
Saturation
Middle (50)
Fixed
50
Middle (50) Middle (50) Middle (50) Disable Middle (50)
Hue
Middle (50)
Fixed
50
Middle (50) Middle (50) Middle (50) Disable Middle (50)
Advanced
Setting
Enable
Disable Enable Enable Enable Disable Disable
Black Level
Enable Disable Enable Enable Enable Disable Disable
Gamma
Enable
(2.2)
Fixed
2.2
Enable
(2.2)
Disable
(2.2)
Disable
(2.6)
Disable
Fixed
2.2
Uniformity
Compensation
Enable
(OFF)
Enable
(OFF)
Enable
(OFF)
Enable
(OFF)
Enable
(OFF)
Enable
(OFF)
Fixed
OFF
In this function, you can adjust the blue light filter level.
To activate this function, you need to do the following: disable HDR on your
device.
Le v el 0
Le v el 1
Le v el 2
Le v el 3
Le v el 4
Blue Light Filter
ASUS P A 3 2 9 C
Standa r d M o d e D is p l ay P o rt 38 4 0 x 2 16 0 @ 6 0H z
No change.
The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Standard Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
To Next Page
Loading...
Need help?
General
