Asus ProArt PA279CV Series - Monitor Controls Overview

1-4
Chapter 1: Product Introduction
1.5 Monitor introduction
1.5.1 Using the Controls button
Use the control button on the bottom of the monitor to adjust the image
settings.
6 5 4 3 2 1
1. Power button/power indicator:
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
2. Menu button:
• Press this button to display the OSD menu when the OSD is off.
• Enters the OSD menu.
• Toggles the Key Lock function between on and off with a long press for 5
seconds.
3. Close Button:
• Press this button to display the OSD menu when the OSD is off.
• Exit the OSD menu.
4. Input Select Button
• Use this hotkey to switch from HDMI-1, HDMI-2, DisplayPort, USB
Tpye-C and Enable/Disable Auto Source Detection input signal.