Asus ProArt PA279CV Series - OSD Menu Navigation and Presets

3-1
ASUS LCD Monitor PA279 Series
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
User Mode 2
ProArtPreset
ProArt
Preset
Darkroom Mode
Rapid Rendering Mode
User Mode 1
Reading Mode
DICOM Mode
Scenery Mode
ProArtPreset
ProArt
Preset
Rec. 709 Mode
DCI-P3 Mode
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
HDR
sRGB Mode
Standard Mode
1. Press any button (except the Power button) to display the OSD menu.
2. Press the Menu button to activate the OSD menu.
3. Press the buttons as indicated on the screen to navigate through the
functions. Highlight the desired function and press to activate
it. If the function selected has a sub-menu, pressand  again to
navigate through the sub-menu functions. Highlight the desired sub-
menu function and press to activate it.
4. Press  and  to change the settings of the selected function.
5. To exit and save the OSD menu, press or repeatedly until the
OSD menu disappears. To adjust other functions, repeat steps 1-4.