Asus ROG G20AJ - Connecting Via a Local Area Network (Lan)

Connecting via a local area network (LAN)
To connect via a LAN:
1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your
computer and the other end to your LAN.
2. Turn on your computer.
3. Configure the necessary Internet connection settings.
• ContactyournetworkadministratorfordetailsorassistanceinsettingupyourInternet
connection.
• Fordetails,refertothesectionConguringtheInternetconnectionsettingsintheWindows®
7 / Windows® 8.1 User Manual, which can be found in this manual.
RJ-45 cable
LAN
3. Turn on the DSL/cable modem and your computer.
4. Configure the necessary Internet connection settings.
• ContactyournetworkadministratorfordetailsorassistanceinsettingupyourInternet
connection.
• Fordetails,refertothesectionConguringtheInternetconnectionsettingsintheWindows®7
/ Windows® 8.1 User Manual, which can be found in this manual.
30 Chapter 4: Connecting to the Internet
ENGLISH
ENGLISH