Asus ROG Maximus XI Gene - Jumpers Configuration; LN2 Mode and Q-Code LED Jumpers

1-12
Chapter 1: Product Introduction
Chapter 1
1.1.7 Jumper
1. LN2 Mode jumper (3-pin LN2_MODE)
WithLN2modeactivated,theROGmotherboardisoptimizedtoremedythecold-boot
bugduringPOSTandhelpthesystembootsuccessfully.
2. 80 light jumper (3-pin 80_LIGHT)
ThisjumperallowsyoutoenableordisabletheonboardQ-CODELED.