Asus ROG Maximus XI Gene - Advanced Menu - Onboard Devices and APM; HD Audio and LED Lighting Configuration; Q-Code LED, USB Power, and Type-C Power; APM Configuration and ErP Ready

ROG MAXIMUS XI GENE
3-19
Chapter 3
3.6.7 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and congure onboard
devices.
HD Audio
This item allows you to use the Azalia High Denition Audio Controller.
Conguration options: [Disabled] [Enabled]
LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Conguration options: [On] [Off]
Q-Code LED Function
[Disabled] Disable the Q-Code LED.
[Auto] Automatically display POST (Power-On Self-Test) code and CPU
temperature on Q-Code LED.
[POST Code Only] Show POST (Power-On Self-Test) code on Q-Code LED.
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
Conguration options: [On] [Off]
USB power delivery in Soft Off state (S5)
This option allows you to disable USB power when your PC is in the S5 state.
Conguration options: [Disabled] [Enalbed]
Back I/O USB Type C Power Mode
[Auto] Power will be provided to USB 3.1 Gen 2 Type-C ports automatically when
a device is detected.
[Enabled] Power will always be on for USB 3.1 Gen 2 Type-C ports.
Improper connection may damage the system permanently.
3.6.8 APM Configuration
The items in this menu allow you to set system wake and sleep settings.
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Conguration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]