Asus ROG Maximus XI Gene - Onboard LEDs for Diagnostics; Q LED for Boot Sequence Status; Condensation Detection LEDs

1-14
Chapter 1: Product Introduction
Chapter 1
1.1.8 Onboard LEDs
1. Q LED (BOOT, VGA, DRAM, CPU)
QLEDcheckkeycomponents(CPU,DRAM,VGAcard,andbootingdevices)in
sequenceduringmotherboardbootingprocess.Ifanerrorisfound,thecorresponding
LEDremainslituntiltheproblemissolved.Thisuser-friendlydesignprovidesan
intuitivewaytolocatetherootproblemwithinseconds.
TheQLEDsprovidethemostprobablecauseofanerrorcodeasastartingpointfor
troubleshooting.Theactualcausemayvaryfromcasetocase.
2. Condensation detection LEDs
TheseLEDswilllightupwhenwatercondensationisdetectedonthecorresponding
criticalkeycomponents(CPU,DRAM,andPCIE).Thisuser-friendlydesignhelpsyou
quicklyidentifypossibledamagescausedbycondensation.