EasyManua.ls Logo

Asus ROG Maximus XI Gene - Internal Connectors - M.2 and System Control; NODE Connector for PSU;Fan Control; M.2 Sockets for SSD Installation

Asus ROG Maximus XI Gene
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-24
Chapter 1: Product Introduction
Chapter 1
11. NODE connector (12-1 pin NODE)
ThisconnectorallowyoutoconnectacompatiblePSUorcontrolacompatiblefan
extensioncard.
Visitwww.asus.comformoreinformationaboutthedevicesandthelatestcompatibilitylist.
12. M.2 sockets (M.2_1; M.2_2)
ThesesocketsallowyoutoinstallM.2SSDmodules.
• M.2_1socketsupportsPCIe3.0x4MKeydesignandtype2242/2260/2280PCIe
storagedevices.
• M.2_2socketsupportsPCIe3.0x4MKeydesignandtype2242/2260/2280PCIe
storagedevices.
• ThesesocketssupportIRST(Intel
®
RapidStorageTechnology).
• Intel
®
OptaneTechnologyisonlysupportedbyM.2_1andM.2_2whensourcedfrom
thePCH.BeforeusingIntel
®
Optanememorymodules,ensurethatyouhaveupdated
yourmotherboarddriversandBIOStothelatestversionfromASUSsupportwebsite.
TheM.2SSDmoduleispurchasedseparately.

Table of Contents

Related product manuals