Asus ROG SWIFT PG27UQR - Chapter 2: Setup; 2.1 Assembling the monitor arm;base; 2.2 Cable management

2-1ASUS PG27UQR Series LCD Monitor
2.1 Assembling the monitor arm/base
1. Insert the base into the arm.
2. Fix the base to the arm by fastening the bundled screw.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Base screw size: M6 x 15 mm.
2.2 Cable management
You can organize the cables with the help of the input/output port cover.
• Arranging the cables
• Using the input/output port cover: the cover can be attached or detached.