Name: Asus ROG SWIFT PG27UQR
Brand: Asus
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2-4 Chapter 2: Setup

2.5 Connecting the cables

Connect the cables as the following instructions:

• To connect the power cord:

a. Connect the power adapter securely to the monitor’s DC IN input.

b. Connect one end of the power cord to the power adapter and the other

end to a power outlet.

• To connect the DisplayPort/HDMI cable:

a. Plug one end of the DisplayPort/HDMI cable to the monitor’s DisplayPort/

HDMI port.

b. Connect the other end of the DisplayPort/HDMI cable to your computer's

DisplayPort/HDMI port.

• To use the earphone: connect the end with plug type to the monitor’s

earphone jack.

• To use the USB 3.2 Gen 1 ports: Take the supplied USB cable, and plug

the smaller end (type B) of the USB upstream cable to the monitor’s USB

upstream port, and the larger end (type A) to your computer’s USB port. Make

sure your computer is installed with the lastest Windows 10/Windows 11

operating system. That will enable the USB ports on the monitor to work.

When these cables are connected, you can choose the desired signal from the

Input Select item in the OSD menu.

If you need to replace the power cord or the connection cable(s), please contact

ASUS customer service.

Questions and Answers:

Need help?

Do you have a question about the Asus ROG SWIFT PG27UQR and is the answer not in the manual?

Asus ROG SWIFT PG27UQR Specifications

General