Asus ROG SWIFT PG48UQ - Chapter 2: Setup; Stand Installation and VESA Mounting

2-1
ASUS LCD Monitor PG48UQ Series
Chapter 2: Setup
2.1 Attaching the Stand
1. Remove the input/output port cover from the rear of the monitor. Then
remove the Allen wrench from the cover.
2. Replace the input/output port cover.Thenalignandinstallthestand
onto its slot.
3. UsingtheAllenwrench,securethestandwiththefour(4)screws.
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damagetothemonitor.