Asus ROG SWIFT PG48UQ - Detaching the Stand (for VESA Wall Mount)

2-3
ASUS LCD Monitor PG48UQ Series
2.3 Detaching the Stand (for VESA wall mount)
ThedetachablestandofthismonitorisspeciallydesignedforVESAwall
mount.
1. Remove the input/output port cover from the rear of the monitor. Then
remove the Allen wrench from the cover.
2. Replace the input/output port cover.
3. UsingtheAllenwrench,removethefour(4)screwssecuringthe
stand.
4. Remove the stand from the monitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damagetothemonitor.
• TheVESAwallmountkit(300x300mm)ispurchasedseparately.
• UseonlytheULListedWallMountBracketwithminimumweight/load
22.7kg(Screwsize:M6x15mm).