Asus ROG SWIFT PG48UQ - Chapter 3: General Instructions; OSD Menu Navigation and Settings

3-1
Chapter 3: General Instruction
Chapter 3: General Instructions
3.1 OSD (On-Screen Display) Menu
3.1.1 How to Recongure
You can either use the remote control or the Control buttons on the
monitor tonavigatethroughthemenuandmakeadjustments.
Gaming
System Setup
MyFavorite
PIP/PBP Setup
Color
Input Select
Image
Overclocking
Shadow Boost
GameVisual
GamePlus
Variable Refresh Rate
MOVE/ENTER
EXIT
BACK
HDR OFF
HDMI-1 3840x2160@ 60Hz
Racing Mode
ROG Swift PG48UQ
Tonavigatethroughthemenuandmakeadjustmentsusingtheremote
control,dothefollowing:
1. Press the Enter button to activate the OSD menu.
2. Move the Navigationbuttonup/downtonavigatethroughthe
functions.HighlightthedesiredfunctionandpresstheEnter button
to activate it. If the function selected has a sub-menu, move the
Navigationbuttonup/downagaintonavigatethroughthesub-menu
functions.Highlightthedesiredsub-menufunctionandpresstheEnter
button or move the Navigationbuttonrighttoactivateit.
3. Move the Navigationbuttonup/downtochangethesettingsofthe
selected function.
4. To exit and save the OSD menu, move the Navigation button left
repeatedly until the OSD menu disappears. To adjust other functions,
repeat steps 1 to 3.