Asus RS500A-E10 Series User Manual

5-34
Chapter 5: BIOS Setup
Disable DF to external IP SyncFloodPropagation [Auto]
Congurationoptions:[Syncooddisabled][Syncoodenabled][Auto]
Disable DF sync flood propagation [Auto]
Congurationoptions:[Syncooddisabled][Syncoodenabled][Auto]
Freeze DF module queues on error [Auto]
Congurationoptions:[Disabled][Enabled][Auto]
CC6 memory region encryption [Auto]
Congurationoptions:[Disabled][Enabled][Auto]
System probe filter [Auto]
Congurationoptions:[Disabled][Enabled][Auto]
Memory Clear [Auto]
Congurationoptions:[Disabled][Enabled][Auto]
PSP error injection support [False]
Congurationoptions:[False][True]
5.10.3 UMC Common Option
DDR4 Common Options
DRAM Timing Configuration
Thisoptionallowsyoutosetmemoryoverclocksettings.Readthedisclaimerand
select
I Accept
to continue.
DRAM Controller Configuration
Power Down Options
Power Down Enable [Auto]
This option allows you to enable or disable DDR power down mode.
Congurationoptions:[Disabled][Enabled][Auto]
Cmd2T [Auto]
This option allows you to select between 1T and 2T mode on ADDR/CMD.
Congurationoptions:[1T][2T][Auto]

Asus RS500A-E10 Series Specifications

General

Storage	8 x 2.5" Hot-swap Storage Bays
SATA	SATA 6Gb/s
Networking	Dual-port Gigabit Ethernet (Intel I350-AM2)
Operating System Support	Windows Server, Linux
Form Factor	1U Rackmount
M.2	1 x M.2 slot (PCIe Gen3 x4, up to 22110)