Need help?Do you have a question about the Asus RS920-E7/RS8 and is the answer not in the manual?
General| Processor family | Intel |
|---|---|
| Processor socket | LGA 2011 (Socket R) |
| Intel Xeon series | E5-4600 |
| Motherboard chipset | Intel® C602 |
| Compatible processor series | Intel® Xeon® |
| Number of processors supported | 4 |
| Maximum RDIMM memory | 1024 GB |
| Maximum UDIMM memory | 256 GB |
| Number of DIMM slots | 32 |
| Supported memory types | DDR3-SDRAM |
| Supported RDIMM clock speeds | 800, 1066, 1333, 1600 MHz |
| Supported UDIMM clock speeds | 1066, 1333 MHz |
| Supported DIMM module capacities | 16GB, 1GB, 2GB, 4GB, 8GB |
| RAID levels | 0, 1, 5, 10 |
| Hot-swap HDD bays | Yes |
| Storage drive sizes supported | 3.5 \ |
| Number of storage drives supported | 8 |
| Supported storage drive interfaces | Serial Attached SCSI (SAS), Serial ATA II, Serial ATA III |
| Graphics card | AST2300 |
| Graphics card family | Aspeed |
| Maximum graphics card memory | 16 MB |
| LAN controller | Intel® I350-AM4 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
| Chassis type | Rack (2U) |
| PS/2 ports quantity | 1 |
| USB 2.0 ports quantity | 6 |
| Ethernet LAN (RJ-45) ports | 5 |
| PCI Express x8 slots | 2 |
| Compatible operating systems | CentOS 5.6 32/64-bit, Windows Server 2008 R2, Windows Server 2008 R2 Enterprise, Windows Server 2008 Enterprise 32/64-bit, RedHat Enterprise Linux AS5.6/6.0 32/64-bit, SuSE Linux Enterprise Server 11.2 32/64-bit, VMWare ESX4.1/ESXi4.1 |
| Safety | CE, EN55022 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 10 - 35 °C |
| Storage relative humidity (H-H) | 20 - 90 % |
| Power supply | 1620 W |
Weight and Dimensions| Depth | 750 mm |
|---|---|
| Width | 444 mm |
| Height | 88 mm |
| Weight | 20000 g |
Lists the items included in the server system package for unboxing and inventory.
Locates and describes the product's serial number label for technical support.
Details the hardware specifications of the RS920-E7/RS8 and RS926-E7/RS8 servers.
Describes the components and indicators located on the front panel of the server.
Details the connectors and slots available on the rear panel of the server.
Identifies and illustrates the main internal components of the barebone server.
Explains the status and meaning of various LEDs on the server's front panel.
Provides step-by-step instructions for removing and replacing the server's chassis cover.
Guides through the process of installing a CPU into the LGA2011 socket.
Details the procedure for installing the CPU heatsink and airduct assembly.
Introduces the DIMM sockets and memory configuration options available.
Presents tables for populating DDR3 DIMMs based on CPU and quantity.
Explains how to install and remove DIMM modules from single and double clip sockets.
Instructs on installing hot-swap SATAII/SAS hard disk drives into the drive bays.
Guides on installing expansion cards into the riser card bracket.
Illustrates the pre-connected system cables and their motherboard connectors.
Covers procedures for removing/installing system fans, power supplies, and PIKE RAID cards.
Details how to attach fixing latches and mount the server to a rack using rail kits.
Provides instructions for aligning server rails and securing the server in a rack.
Presents a diagram of the motherboard with labeled jumpers, connectors, and LEDs.
Explains the function and configuration of various motherboard jumpers.
Details the various internal connectors on the motherboard and their purposes.
Describes the function and location of internal LEDs for system status.
Covers utilities like CrashFree BIOS, EZ Flash, and BUPDATER for BIOS management.
Explains how to access and navigate the BIOS setup utility interface.
Details settings for system date, time, language, and security in the Main menu.
Covers configuration options for CPU, chipset, onboard devices, and system settings.
Describes settings for server management features like watchdog timers and BMC configuration.
Explains how to view and configure system event logs and SMBios logging.
Details settings for boot device priority, NumLock state, and full screen logo.
Displays system temperature, voltage, and fan speed information.
Covers setting and managing Administrator and User passwords for system security.
Provides access to special function utilities like ASUS EZ Flash 2.
Explains how to save changes, discard changes, or restore default BIOS settings.
Introduces SATA RAID solutions and defines RAID levels like 0, 1, 1E, 10, and 5.
Guides on using the LSI MegaRAID utility to create, manage, and rebuild RAID sets.
Details creating RAID sets using the Intel SCU/SATA Option ROM utility.
Provides instructions for managing RAID configurations within the Windows operating system.
Explains how to create RAID driver disks and install RAID controller drivers.
Provides steps for installing the Intel chipset device software on Windows.
Guides on installing the Intel Network Connections software on Windows.
Details the process of installing the ASPEED Video Graphics Adapter (VGA) driver.
Instructions for installing Intel C600 Series Chipset SATA RAID drivers.
Covers the installation of the Microsoft .NET Framework 3.5 SP1 software.
Steps for installing the Intel Rapid Storage Technology enterprise 3.0 utility.
Guides on installing the Intel I350 Gigabit Adapters driver on Windows.
Instructions for installing drivers, management applications, and utilities from the support DVD.
To Next Page