Asus RS920-E7/RS8 - LAN Controller Setting (3-Pin LAN_SW1); ME Firmware Force Recovery Setting (3-Pin ME_RCVR1)

4-6 Chapter 4: Motherboard information
4. LAN controller setting (3-pin LAN_SW1)
These jumpers allow you to enable or disable the onboard Intel
®
i350 Gigabit
LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature.
5. MErmwareforcerecoverysetting(3-pinME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from
recovery mode when ME become corrupted.