7
Rear
Label Description
Reset
Press this button for more than five seconds to restore the
system to its factory default settings.
Power
Press this button to power on/off the wireless router.
Insert the AC adapter into this port to connect your router to
a power source.
LAN1-LAN4
Connect RJ-45 Ethernet cables to these ports to establish
LAN connection.
WAN
Connect an RJ-45 Ethernet cable to this port to establish
WAN connection.
WPS Press this button for more than four seconds to establish a
secure wireless connection with a WPS-supported wireless
device.
To Next Page
Loading...
