Asus TUF Z270 MARK 2 - Monitor Menu; Boot Menu

3-20
Chapter 3: BIOS Setup
Chapter 3
3.7 Monitor menu
TheMonitormenudisplaysthesystemtemperature/powerstatus,andallowsyoutochange
the fan settings.
CPU Temperature / MotherBoard Temperature / PCH Temperature
[xxx°C/xxx°F]
TheonboardhardwaremonitorautomaticallydetectsanddisplaystheCPU,MotherBoard,
andPCH
temperatures. Select [Ignore] if you do not wish to display the detected
temperatures.
Q-Fan Configuration
Q-fan Tuning
Clickthisitemtoautomaticallydetectthelowestspeedandconguretheminimum
duty cycle for each fan.
AIO PUMP Control
[Disabled] DisabletheAIOPUMPcontrolfeature.
[Auto] Detects the type of AIO pump installed and automatically switches the
control modes.
[DCmode] EnabletheAIOPUMPcontrolinDCmodefor3-pinchassisfan.
[PWMmode] EnabletheAIOPUMPcontrolinPWMmodefor4-pinchassisfan.
3.8 Boot menu
The Boot menu items allow you to change the system boot options.
Fast Boot
[Disabled] Allows your system to go back to its normal boot speed.
[Enabled] Allows your system to accelerate the boot speed.
The following items appear only when you set the Fast Boot to [Enabled].
Next Boot after AC Power Loss
[NormalBoot] ReturnstonormalbootonthenextbootafteranACpowerloss.
[FastBoot] AcceleratesthebootspeedonthenextbootafteranACpowerloss.
Setup Mode
[AdvancedMode]ThisitemallowsyoutogotoAdvancedModeoftheBIOSafterPOST.
[EZMode] ThisitemallowsyoutogotoEZModeoftheBIOSafterPOST.