Asus TUF Z270 MARK 2 - Tool Menu; ASUS EZ Flash 3 Utility

3-22
Chapter 3: BIOS Setup
Chapter 3
Boot Option Priorities
Theseitemsspecifythebootdeviceprioritysequencefromtheavailabledevices.The
number of device items that appears on the screen depends on the number of devices
installed in the system.
 To access Windows
®
OSinSafeMode,press<F8>afterPOST(Windows
®
8 not
supported).
 To select the boot device during system startup, press <F8> when the ASUS Logo
appears.
Boot Override
These items displays the available devices. The number of device items that appears on
thescreendependsonthenumberofdevicesinstalledinthesystem.Clickanitemtostart
booting from the selected device.
3.9 Tool menu
TheToolmenuitemsallowyoutocongureoptionsforspecialfunctions.Selectanitemthen
press <Enter> to display the submenu.
Setup Animator
This item allows you to enable or disable the Setup Animator.
Congurationoptions:[Enabled][Disabled]
3.9.1 ASUS EZ Flash 3 Utility
ThisitemallowsyoutorunASUSEZFlash3.Whenyoupress<Enter>,aconrmation
messageappears.Usetheleft/rightarrowkeytoselectbetween[Yes]or[No],thenpress
<Enter>toconrmyourchoice.
For more details, refer to section 3.11.2 ASUS EZ Flash 3.