Asus TUF Z270 MARK 2 - ASUS SPD Information; Graphics Card Information

3-24
Chapter 3: BIOS Setup
Chapter 3
Load from Profile
ThisitemallowsyoutoloadthepreviousBIOSsettingssavedintheBIOSFlash.Keyinthe
prolenumberthatsavedyourBIOSsettings,press<Enter>,andthenselectYes.
 DONOTshutdownorresetthesystemwhileupdatingtheBIOStopreventthe
system boot failure!
 WerecommendthatyouupdatetheBIOSleonlycomingfromthesamememory/
CPUcongurationandBIOSversion.
Profile Name
Thisitemallowsyoutokeyinaprolename.
Save to Profile
This item allows you to save the current BIOS settings to the BIOS Flash, and create a
prole.Keyinaprolenumberfromonetoeight,press<Enter>,andthenselectYes.
Load/Save Profile from/to USB Drive
Thisitemallowsyoutoload/saveprolefrom/toyourUSBdrive.
3.9.3 ASUS Overclocking Profile
This item allows you to store or load multiple BIOS settings.
3.9.4 ASUS SPD Information
ThisitemallowsyoutoviewtheDRAMSPDinformation.
3.9.5 Graphics Card Information
This item displays the information about the graphics card installed in your system.
GPU Post
ThisitemdisplaystheinformationandrecommendedcongurationforthePCIEslotsthatthe
graphics card is installed in your system.
This feature is only supported on selected ASUS graphics cards.
Bus Interface
This item allows you to select the bus interface.
Congurationoptions:[PCIEX16_1][PCIEX16_2]