Asus TUF Z270 MARK 2 - Page 80

3-28
Chapter 3: BIOS Setup
Chapter 3
 ThisfunctioncansupportdevicessuchasaUSBashdiskwithFAT32/16formatand
single partition only.
 DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
theLoadOptimizedDefaultsitemundertheExitmenu.Seesection3.10 Exit menu for
details.
To update the BIOS by Internet:
1. EntertheAdvancedModeoftheBIOSsetupprogram.GototheToolmenutoselect
ASUS EZ Flash 3 Utility and press <Enter>.
2. Select via Internet.
3. Press the Left/Right arrow keys to select an Internet connection method, and then
press <Enter>.
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
theLoadOptimizedDefaultsitemundertheExitmenu.Seesection3.10 Exit menu for
details.
4. Follow the onscreen instructions to complete the update.
5. Reboot the system when the update process is done.