Asus TUF Z270 MARK 2 - Page 86

4-4
Chapter 4: RAID Support
Chapter 4
5. When the Strip Size item is selected, press <Enter> to select strip size for the RAID
array (for RAID 0, 10 and 5 only), and then press <Enter>. The available strip size
valuesrangefrom4KBto128KB.Thefollowingaretypicalvalues:
- RAID0:128KB
- RAID10:64KB
- RAID5:64KB
We recommend a lower strip size for server systems, and a higher strip size for multimedia
computer systems used mainly for audio and video editing.
6. When the Capacity (MB) item is selected, enter the RAID volume capacity that you
want and press <Enter>. The default value indicates the maximum allowed capacity.
7. When the Create Volume item is selected, press <Enter> to create the RAID volume
and return to the Intel(R) Rapid Storage Technology menu.