Asus VG236H - Detaching the Arm;Stand for VESA Wall Mount

Chapter2:Setup2-1
2.1 Detaching the arm/stand
(for VESA wall mount)
ThedetachablestandoftheVG236SeriesLCDmonitorisspeciallydesignedfor
VESAwallmount.
Todetachthearm/stand:
1. Lowerthemonitortoitslowestheight,andtheninsetthemonitorheight
adjustment lock.
2. Have the front of the monitor face down on a table.
3. UseascrewdrivertoremovethetwoscrewsontheVESAcover,theslideout
thearm/basetodetachitfromthemonitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damage to the monitor.
• Holdthestandofthemonitorwhenyouremovethescrews.
TheVESAwallmountkit(100mmx100mm)ispurchasedseparately.
ForuseonlywithULListedWallMountBracketwithminimumweight/load7.4
Kg(Screwsize:4mmx12mm)